Load Capacity: 1-500 tons
Size：Can be customized to meet your needs
Motors: PMAC / AC high efficiency motors
Rail type: embedded rail / ground rail
Rotation bearing: slewing bearing / heavy-duty turntable bearing
Rotation angle: 90° / 180° / 360° (customizable)
Tire types: solid tires/pneumatic tires/rubber tires
This transfer vehicle is equivalent to a turntable, using a track type turntable structure that can rotate in multiple directions to achieve multi-directional material flow. This transfer vehicle is designed for heavy-duty materials and can carry hundreds of tons, which can be applied in heavy and high load industrial applications
The problem of restricting materials in fixed track direction
The track has a fixed direction, and traditional rail transport vehicles can only move forward/backward, unable to switch directions at the same position. The space is limited, and if it is manually turned under heavy load, the risk factor is high and it is difficult, making transportation a challenge.
Why Direction Change Becomes a Critical Requirement
1.Most production lines do not have a single direction, and materials need to be circulated between different workstations
2.The change of direction must occur at a fixed point and the direction adjustment must be completed at the designated location
High precision requirements
1. This rotary track transfer vehicle is designed specifically for heavy-duty track type material handling, and it is crucial to be able to rotate smoothly under load. The turntable on the track should not only be a rotating platform, but also have strong load-bearing capacity.
The enhanced design of the steel turntable structure combined with the heavy-duty bearing system has no impact under high load conditions. During the rotation process, the load force is evenly distributed to minimize vibration and maintain stability.
3. The design of this structure can withstand high rotational torque and frequent operation, making it suitable for continuous industrial use. Stable rotation at a fixed track position can achieve reliable multi-directional docking without affecting safety or alignment.
High precision rotational positioning at pre-set fixed track intersections
Seamless alignment with multi-directional orbit after rotation
There is no deviation during the process of full load and heavy load
Ensure the smooth progress of orbit transfer
| Model | BXC-2t | BXC-20t | BXC-50t | BXC-100t | BXC-150t | |
| Rated Load(t) | 2 | 20 | 50 | 100 | 150 | |
| Table Size(mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
| Width(W) | 1500 | 2200 | 2500 | 2800 | 3000 | |
| Heigth(H) | 450 | 550 | 650 | 900 | 1200 | |
| Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 | |
| Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 2000 | 2000 | |
| Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 | |
| Wheel Quantity | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 | |
| Running Speed(min) | 0-25 | 0-20 | 0-20 | 0-20 | 0-18 | |
| Motor Power(kw) | 1 | 2.2 | 5 | 10 | 15 | |
| Battery Capacity | 180 | 180 | 330 | 440 | 600 | |
| Battery Voltage | 24 | 48 | 48 | 72 | 72 | |
| Running Time When Full Load | 4.32 | 4 | 3.3 | 3.2 | 2.9 | |
| Running Distance for One Charge(Km) | 6.5 | 4.8 | 4 | 3.8 | 3.2 | |
| Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 | |
| Reference Weight(t) | 2.8 | 5.9 | 8 | 14.6 | 26.8 | |
| Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 | |
360 degree motorized rotation without causing any damage to the floor.
Powered by storage battery, turning freely without any cable strings.
Controlled easily by pressing the buttons and speed controller.
High level automation(self propelled/steerable)
The largest capacity can reach to 100t
Safe parts are installed in the transfer cart(warning light, e-stop, buffer...)
Robust sturdy car frame
Please feel free to give your inquiry in the form below .We will reply you in 24 hours .
