20 ton trackless transfer cart with a 400mm overall height — battery powered, rail-free, 360° steering and radar anti-collision for low-clearance factories.
Speed: 1-20 m/min or ad your needs
Certificate: SGS, ISO9001, SASO
Motors: PMAC / AC high efficiency motors
Wheels: Cast Steel Polyurethane Wheel
The BWP 20 ton trackless transfer cart is a heavy-duty, battery-powered transfer vehicle with an overall height of just 400mm from floor to deck surface, built for factories where low door openings, press beds and overhead crane rails squeeze the working envelope. Its low deck and center of gravity, 360° pivot steering and radar anti-collision system let it carry heavy molds, steel coils and machined frames into places a forklift cannot reach, while rail-free running on flat concrete, epoxy or steel floors means no track, no pit and no layout restrictions — one cart can serve multiple bays and shifts.
Most transfer carts stand 550–800mm tall because a thick frame and large wheels are the easy way to carry 20 tons. Reaching 400mm means re-designing the chassis — a welded, box-reinforced frame with the drive units packaged inside the deck. The payoff is a cart that clears press tie-bars and low door frames, keeps a 20-ton load stable in turns, docks level with press beds and conveyors, needs only a short ramp, and installs without a foundation pit.
The comparison below shows where the 400mm, 20-ton trackless platform outperforms the two alternatives most factories already own.
|
Criterion |
BWP 20T trackless cart |
Forklift |
Rail transfer cart |
|
Rated capacity |
20 t (1–200 t available) |
Typically up to 5 t |
20 t and above |
|
Load height |
Fixed 400mm low deck |
Forks lift 0–3 m+ |
Deck height varies; rails required |
|
Route flexibility |
Free movement, 360° turns |
Free but aisle-dependent |
Fixed track only |
|
Floor / civil work |
Flat slab, no rails, no pit |
Flat slab, wide aisles |
Rail foundation and pit |
|
Load stability |
Carried flat at 400mm |
Tipping risk when lifted |
Stable but track-bound |
|
Automation |
PLC + positioning optional |
Manual operation |
Possible along the trackvv |
Please feel free to give your inquiry in the form below .We will reply you in 24 hours .
