The BWP-20T Lift hydraulic lift transfer cart combines heavy-duty material transportation and vertical lifting into one integrated solution.
Unlike traditional mold handling methods that require an overhead crane, forklift, and separate lifting equipment.
This 20 ton lift cart allows operators to move and raise heavy dies directly at the production line.
Powered by a lithium battery system, the cart travels freely without rails and uses a hydraulic scissor lift platform
to raise loads from 800mm to 1500mm.It is designed for:
One operator can move the mold from storage, position it beside the machine, and lift it to the required working height.
The reinforced steel platform is designed for 20 ton industrial loads.
The heavy-duty scissor mechanism provides smooth vertical movement.
Multiple hydraulic cylinders operate together to maintain platform balance.
Safety is critical when handling 20-ton loads.
The BWP-20T Lift uses mechanical locking pins after reaching the target height.
Standard lifting range:
800mm - 1500mm
The built-in lithium battery allows flexible movement without rails.
Large PU wheels provide smooth movement and reduce floor impact.
Operators can control movement and lifting from a safe distance.
| Item | Specification |
| Model | BWP-20T Lift |
| Capacity | 20 Tons |
| Platform Size | 7000 x 3600 mm (Customizable) |
| Lift Range | 800 – 1500 mm (Stroke) |
| Lift System | Scissor Hydraulic |
| Safety | Auto-Lock Pins |
| Power | 400Ah Lithium Battery |
| Drive | Dual Motor / Arc Steering |
| Wheels | Ø300mm Polyurethane |
| Controls | Wireless Remote + Wired Pendant |
| Sync Accuracy | ±1mm between corners |
The BWP-20T Lift provides a faster alternative:
A traditional crane-based mold change may require multiple operators and equipment coordination.
The lift transfer cart reduces handling steps and improves production efficiency.
Large stamping dies require reliable transportation equipment.
The BWP-20T Lift supports:
Manufacturers can use the lift cart for moving large components such as:
Traditional mold handling may require:
The BWP-20T Lift combines transportation and lifting functions into one machine.
By bringing the mold directly to machine height, operators spend less time on lifting preparation and equipment coordination.
It supports Quick Mold Change (QMC) strategies and improves production efficiency.
Compared with manual lifting or temporary supports, the integrated hydraulic system and mechanical locking pins provide a safer lifting solution.
The rigid platform and synchronized cylinders maintain stability during lifting.
This helps molds align accurately with:
Please feel free to give your inquiry in the form below .We will reply you in 24 hours .
Q1: What happens if the hydraulic system loses pressure?
The BWP-20T Lift uses mechanical safety locking pins and hydraulic protection valves.
The load remains supported after reaching the required lifting height.
Q2: Can the cart move while the platform is raised?
For safety reasons, transportation is performed at the lowest position.
The cart lifts only after reaching the working position.
Q3: How long does the lifting operation take?
The standard lifting cycle is approximately 20-30 seconds depending on load and configuration.
Q4: Is this suitable for injection mold transportation?
Yes.
The BWP-20T Lift is specifically designed for heavy mold transfer, die handling, and production line positioning.
Q5: Can the platform size and lifting height be customized?
Yes.
Platform dimensions, lifting height, battery capacity, and control systems can be customized according to customer requirements.
Need a 20 ton hydraulic lift transfer cart for mold handling or die change?
Send us:
Our engineers will provide a customized solution and technical drawing.
